Diesel-powered, water-cooled, 1500 rpm engine.
3x400V, 3-phase, 50 Hz, alternator with AVR, MCB.
Manual mode operation, genset controller with AMF functionality (optional ATS required).
Starter battery, engine block heating and battery charging (from client’s grid).
Without glow plug, with block heater.
Cranking by electrical starter motor.
Engine stop by fuel restriction.
Water cooling via push-fan heat exchanger.
Automatic voltage regulation (AVR on alternator).
Warnings & alarms for essential measurements (optional protection functions available).
Default electrical power outlet connection is circuit breaker (3P MCB).
Genset controller features:
Digital easy-to-use controller with display.
Manages essential functions & parameters of the genset.
Receives & displays measurements, warnings and alarms from engine/drive system and alternator/electrical system, like voltages, frequency, currents, loads, temperatures, levels, counters, etc.
Logs all essential parameters.
USB connection for service personnel.
Remote start (2-wire)
1 outgoing programmable “dry contact” (without separating relay)
1 incoming programmable “dry contact” (without separating relay)
Daily fuel tank positioned between base frames, under engine & alternator, providing ca. 8 operating hours at full load.
High pressure fuel injection.
Optional additional features, not included in default configuration:
Sound- and weatherproof canopy.
ATS for AMF functionality.
MCB with shunt release for additional overload protection.
Engine actuator, AVR and genset controller for synchronization functionality.
Separating relays for “dry contacts”.
Additional outgoing and/or incoming programmable “dry contact” extension modules.
230V/400V electrical socket outlet cabinet with protection.
Preparation for SMS/e-mail sending via 2G/4G mobile network.